前后面板接口图
前后面板接口图
OTF-610H-H110搭载6th/ 7th/ 8th Intel Core i7/i5/i3/ Pentium/ Celeron 处理器,H110芯片组,双通道DDR4内存,最大可达32G,HDMI+DP双显示输出,4U标准机架式设计,适应各种工业环境
6th/ 7th/ 8th Intel Core i7/i5/i3/ Pentium/ Celeron 处理器
双通达DDR4内存,最大达32G
HDMI+DP双显示输出
PCIe X16
支持WiFi
Processor System | CPU | Socket LGA 1151 (6th-9th Gen Core, Pentium, Celeron) |
Chipset | Intel Q170 Chip | |
Max. CPU TDP | Hexa-Core 65W (Do not support Octa-Core 65W/95W CPU) | |
Memory | Technology | Dual channel DDR4 2133/2400Mhz |
Max capacity | 128GB (6-7th Gen 64GB only) | |
Socket | 4x U-DIMM 288 pin | |
Graphics | Chipset | Intel HD/UHD Graphics (based on CPU) |
Graphic Engine | H.265, HDCP 2.2, DirectX 12, OpenGL 4.5 | |
Ethernet | Controller | GbE LAN 1: Intel I211/I210 GbE LAN 2: Intel I211/I210 |
Speed | 10/100/1000 Mbps | |
Expansion Slot | PCIe x16 (Gen3) | 1x FH/FL |
PCIe x16 (Gen3) | 2x FH/FL | |
PCI | 4x FH/FL | |
M.2 (B key) | 1x M.2 2242/2252 slot (4G/5G) | |
M.2 (E key) | 1x M.2 2230 slot (WI-FI) | |
Storage | Drive Bay | 3x SATA3.0 for 2.5"/3.5" SSD/HDD & 1x SATA3.0 for 2.5" SSD/HDD |
M.2 (B key) | 1x 2242/2280 SATA slot (SSD) | |
Rear I/O | Display | VGA, DVI, HDMI |
RJ-45 | 2 | |
USB | 4x USB3.2, 2x USB2.0 | |
Serial | 1x DB9 RS-232 | |
Audio | Line-out, Line-in, Mic-in | |
PS/2 | 1 (KB/MS) | |
Additional optional | 2x USB3.2, 2x USB2.0, 3x DB9 RS-232, 2x DB9 RS232/485, 8 bit GPIO | |
Front I/O | USB | 2x USB2.0 |
Control & LED Indicators | ON/OFF Button, Reset, SYS LED, HDD LED | |
Power Requirement | Power Input Voltage | Single AC 220V Input (AC 110V Optional) |
Power Supply Type | 4U ATX non-redundant, 300W-700W power supply | |
Environment | Operating Temp. | 0 ~ 60 °C (32 ~ 140 °F) |
Storage Temp. | -40 ~ 80°C (-40~176 °F) | |
Relative Humidity | 95% @ 40 °C (non-condensing) | |
Other | OS | Win 10, Win 11, Linux (by Project) |
Dimensions (W x H x D) | 426 x 177 x 482 mm |